3 1/2'' CA102MM Goyen Replacement Dust Collector Valve
|Payment Type:||L/C,T/T,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||4-8 Days|
|Packaging:||Box Carton Pallet|
|Productivity:||10000 sets per week|
|Place of Origin:||NINGBO CHINA|
|Supply Ability:||50000 sets per month|
Model No.: CA89MM
CA89MM Angle Type Electromagnetic Pulse Valve
What is a Dust Collector Pulse Jet Valve?
Diaphragm pulse valves are the most important components of a baghouse pulse jet cleaning system.
On a pulse jet baghouse pulse valves (also called diaphragm valves) control the release of air pulses during the cleaning cycle. When the baghouse control board or timer board initiates a cleaning cycle it sends an electrical signal to the solenoids, when then activate the pulse valve. Inside the pulse valve, a rubber diaphragm opens and closes to release the compressed air stored in the air header tank. The air then passes through the valve into the blow pipes above the filters and then is directed down into the filters to clean them.
Technical data of MM Series Full Immersion Manifold Flat Mount Valves:
Overall dimension of CA102MM Goyen Replacement Dust Collector Valve:
Details display of CA102MM Goyen Type Dust Collector Pulse Valve:
Spare Parts of Full Immerse Manifold Mounted Pulse Jet Valve:
Part Name Material Solenoid coil Enamelled wire Armature assembly SS304, 430FR Small common cap ADC aluminum (die cast) Diaphragm NBR (Nitrile, buna-n) Top end cap ADC aluminum (die cast) Big spring SS304 Screws SS302 Seal NBR, VITON Main body ADC aluminum (die cast)
Pulse jet valves must do the following safety inspection before it is officially delivered:
1. Insulation resistance test:
(1) Measure the insulation resistance of the solenoid coil to the outer casing under the specified environmental conditions using a 500V meter with a range of 0MΩ to 500MΩ and an accuracy of 1 meter.
(2) Put the valve in the temperature regulation and humidity control box, and set the temperature to 35 degrees, and the relative humidity is 85%, apply a 50Hz, 250V sinusoidal AC voltage between the electromagnetic coil and the valve body for 1min. Check for breakdown.
2. Anti-vibration test: the valve is fixed on the vibration test bench, after the vibration frequency is 20Hz, the full amplitude is 2mm, after 30min vibration, check whether the fasteners of each part of the valve are loose, whether the work is normal.
3. Diaphragm service life test: Connect the clean air of nominal pressure to the air inlet of the electromagnetic pulse valve, and input the nominal voltage value of 0.1s width and interval of 3s on the solenoid valve, and record the number of continuous or cumulative work of the valve.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
NINGBO BRANDO HARDWARE CO.,LTD
Brando is a professional manufacturer and designer of solenoid valve, solenoid coil and solenoid valve armature assembly, located in Ningbo, China. Our main products include armature assembly, solenoid coil, brass solenoid valve, stainless steel solenoid valve, plastic solenoid valve, pneumatic solenoid valve, pulse jet valve, diaphragm repair kit, pulse controller, injector rail and can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.
Brando maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.
Brando has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.
2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.
3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.
1. Solenoid Coil
2. Solenoid Armature/Stem
3. 5/2, 5/3, 3/2, 2/2 Way Pneumatic Valve
4. Refrigeration Solenoid Valve
5. Dust Collector Pulse Jet Valve
6. Diaphragm Repair Kit
7. Pulse Controller
8. Brass Solenoid Valve
9. Stainless Steel Solenoid Valve
10. Plastic Solenoid Valve
11. Injector Rail
Focus On Your Demands, Offer You Best Solution!
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products